Spring torsion testing machine introduction, operation procedures, maintenance methods


Release time:

2024-09-09

If the springs installed on the vehicle have not been strictly tested, then they will be installed on the vehicle at random. The performance will not meet the requirements. The consequences are very serious. The springs used for shock absorption will lose balance due to the decline in performance, which is easy to cause traffic accidents. The best spring tester on the market is the spring tester produced by Jinan Huaheng Testing Equipment Co., Ltd.

Spring torsion testing machine introduction Operating procedures Maintenance methods Special spring testing program designed according to national standards, high efficiency, full functions, easy operation, considering the mechanical principle and program software to improve the precise measurement range of the range, that is, suitable for batch detection and sorting of springs on the production line, and also suitable for precision sampling in the laboratory. Data and curves are dynamically displayed during the test process, and the curves can be re-analyzed. The data corresponding to each point on the curve can be enlarged, reduced and clicked to view the data. The force value, displacement, stiffness, curve and other data can be formed into a standard test report for printing.

After the spring is produced, it must pass strict tests before it can be put into use, because most springs are used in machinery and vehicles. For example, if the springs installed on the vehicle have not been strictly tested, they will be installed on the vehicle. Performance does not meet the requirements. The consequences are very serious. The springs used for shock absorption, because of the decline in performance, make the vehicle lose balance, which is easy to cause traffic accidents. The best spring testing machine on the market is the spring testing machine produced by Jinan Huaheng Testing Equipment Co., Ltd. It uses LED touch screen and full microcomputer operation. It can measure the length, strength and spring coefficient of the spring. The program can be pre-set. Then the following work is simple. Just put the spring into the test disk. Press start to measure automatically. The written program can be stored in the microcomputer.

When using it, call it out in the cluster. The number of test spring segments can be set to 10 at most. The main functions of the spring torsion tester are torsion torque and angle are digitally displayed. The angle measurement uses an angular displacement sensor (photoelectric encoder). The angular displacement of the torque sensor can be automatically corrected. The machine also has peak hold, overload protection, stiffness calculation, result printing, data query and other functions, manual loading, left and right rotation can be selected at will, compact structure, simple operation, fast detection speed, and the test piece is placed vertically on the torque disk during measurement, which is convenient for clamping. The spring tester is a special instrument for testing springs. After the spring is produced, it must pass strict testing before it can be put into use, because most springs are used in machinery and vehicles. The main components on the vehicle, let's take the spring on the vehicle as an example. If the spring installed on the vehicle has not been strictly tested, it will be installed on the vehicle at random. performance but did not meet the requirements.

Latest News

Recommend a flue pressure testing machine

The precise automatic control and data acquisition system realizes the full digital adjustment of data acquisition and control process. It conducts tests and provides test data according to GB, ISO, JIS, ASTM, DIN, BS and other international standards. It automatically completes the test parameters such as the maximum bearing capacity and strength of the material.

2024-09-09

Spring tension and compression testing machine software function introduction

After the test, the data can be saved automatically or manually. After the test, the maximum force, upper and lower yield strength, Hysteresis loop method, stepwise approximation method, non-proportional extension strength, tensile strength, compressive strength, elongation strength at any point, Elongation at any point with fixed load, elastic modulus, elongation, maximum value, minimum value, average value, net energy of the peeling interval, Reentry energy, total energy, bending modulus, breakpoint displacement x% load, breakpoint load X% displacement, etc.

2024-09-09

High and low temperature spring tension and compression fatigue testing machine features

Embedded high-performance single-chip CPU controller; dot matrix LCD; full Chinese operation display; multi-key operation; automatic memory of parameter settings, automatic connection test at startup, front pickup

2024-09-09

Recommend a locomotive coil spring fatigue testing machine

Main test waveforms: sine wave, triangle wave, square wave, trapezoidal wave, ramp wave and program control wave, etc.

2024-09-09

Introduction of New Electro-hydraulic Pulsation Fatigue Testing Machine

The electro-hydraulic pulsating fatigue testing machine adopts a unique crank-connecting rod rocker mechanism to achieve pulsating sinusoidal wave loading on the test piece. It adopts the best energy-saving design and its energy consumption is one twentieth of that of traditional fatigue equipment!

2024-09-09

Precautions for adjusting the zero point of hydraulic universal testing machine

When the cylinder is not raised, the test force displays a negative value, which is normal. Please do not adjust the zero point.

2024-09-09

Jinan Kaide Instrument Co., Ltd.

Apply For Discount !

24 Hours Online Service

Provide You With Free Industry Solutions

Quality Assurance

%{tishi_zhanwei}%