+
  • 45.png
  • 46.png
  • 47.png

WDW-TH20D Computer Control Electronic Spring Testing Machine

Capacity:20KN
Crosshead Speed:0-200 mm/min
Accuracy:0.5
Power:220V±10%
Tensile Space:600mm
Weight:600mm

Application

This 20kn Computer spring tension and compression tester /spring testing machine  is developed and produced by our company, which is mainly used to test the strength of all kinds of valve springs  and elastic components. 50kn Computer spring tension and compression tester /spring testing machine  can measure the test force of spring and elastic component under the certain deformation or remaining height, and also can measure the remaining height or deformation of spring and elastic component under the certain test force. The testing machine is developed and produced according to the requirements of JB/T7796-2005 Tension and compression spring testing machines.

Specification

 

Maximum test force

20kN

Test force measurement range

2%~100%

Test force measurement accuracy

better than ± 0.5% of the indicated value

Displacement resolution

0.001mm

Displacement measurement accuracy

 ± 0.5%

Relative error of deformation indication value

within± 0.5%

Deformation resolution

0.001mm

Relative error of force control rate

within ± 1% of the set value

Crossbeam measurement range

 0.001~200mm/min;

Tensile space

0~600mm

Compression space

 0~600mm

Maximum travel of crossbeam

600mm

Power supply

220V 50Hz

 

Key Features

1. Host: The machine adopts a double-space door structure, the upper space is stretched, and the lower space is compressed and bent. The beam is steplessly raised and lowered. The transmission part adopts circular arc synchronous toothed belt, screw pair transmission, stable transmission and low noise. The specially designed synchronous toothed belt deceleration system and precision ball screw pair drive the moving beam of the testing machine to realize a backlash-free transmission.

2. Accessories:

Standard configuration: one set of wedge-shaped tension attachment and compression attachment.

 3. Electrical measurement and control system:

(1) Adopt TECO AC servo system and servo motor, with stable and reliable performance, with over-current, over-voltage, over-speed, overload and other protection devices.

(2) It has protection functions such as overload, over current, over voltage, upper and lower displacement limits and emergency stop.

(3) The built-in controller ensures that the testing machine can achieve closed-loop control of parameters such as test force, sample deformation and beam displacement, and can achieve constant velocity test force, constant velocity displacement, constant velocity strain, constant velocity load cycle, Tests such as constant velocity deformation cycles. Smooth switching between various control modes.

(4) At the end of the test, you can manually or automatically return to the initial position of the test at high speed.

(5) Realize the real physical zero adjustment, gain adjustment, and automatic shift, zero adjustment, calibration and storage of test force measurement without any analog adjustment links, and the control circuit is highly integrated.

(6) The electrical control circuit refers to the international standard, conforms to the electrical standard of the national testing machine, and has strong anti-interference ability, which ensures the stability of the controller and the accuracy of the experimental data.

(7) It has a network interface, which can carry out data transmission, storage, printing records and network transmission and printing, and can be connected to the internal LAN or Internet network of the enterprise.

4. Description of the main functions of the software

The measurement and control software is used for microcomputer-controlled electronic universal testing machines to conduct various metal and non-metal (such as wood-based panels, etc.) tests, and complete various functions such as real-time measurement and display, real-time control and data processing, and result output in accordance with corresponding standards.

(1) Divided authority management. Operators of different levels have different operating authority, and the contents of operable menus are also different, which makes the operation simple, convenient and fast for ordinary operators, and effectively protects the system;

(2) Real-time measurement and display of test force, peak value, displacement, deformation and other signals; real-time acquisition and control under NT mode platforms such as Win2000 and WinXP; and accurate timing and high-speed sampling;

(3) Real-time screen display of various test curves such as load-deformation, load-displacement, etc., can be switched and observed at any time, and it is very convenient to zoom in and out of the curve;

(4) The computer storage, setting, loading and other functions of test parameters, zero adjustment, calibration and other operations are all carried out on the software, and each parameter can be stored and transferred easily, so that one host can be equipped with multiple sensors. Convenient switching, and there is no limit on the number;

(5) Support a variety of control methods, including open-loop constant velocity displacement and constant velocity force, constant velocity stress and other closed-loop control methods; and provide a standard reference curve when the advanced operator adjusts the closed-loop parameters, so that users can actually observe To the influence of each parameter on the closed-loop effect.

(6) An expert system for intelligent setting of test process control modes is provided to professional users with automatic program-controlled programmers. Users can flexibly combine multiple control methods and control speeds according to actual needs and compile control programs that suit their needs. The measurement and control software will automatically control the test process according to the user settings.

(7) Analyze data by means of human-computer interaction. The processing method meets the requirements of the widely used "GB/T 228-2002 Room Temperature Tensile Test Method for Metallic Materials", which can automatically calculate various performance parameters such as elastic modulus, yield strength, specified non-proportional extension strength, and manual intervention in the analysis process. , Improve the accuracy of analysis; other data processing can also be performed according to the standards provided by the user.

(8) The test data is stored in text files to facilitate user inquiries, and use any general business reports and word processing software to reprocess the test data, and to facilitate the transmission of data online;

(9) It can record and save the data curve of the whole test process, and has a demonstration function to realize the test curve reproduction. It is also possible to superimpose and compare curves to facilitate comparative analysis;

(10) The test report can be printed in the format required by the user. Users can choose to report and output basic information, test results and test curve content by themselves to meet various needs;

(11) Digital zero adjustment and automatic calibration of test force and deformation are realized, which facilitates operation and improves the reliability of the machine. Various parameter system settings are stored in the form of files, which is easy to save and restore;

(12) It can be applied to various operating systems such as Win98, Win2000, WinXP. Test process control, beam moving speed change, parameter input and other operations can all be completed with keyboard and mouse, which is convenient and quick to use;

(13) It can automatically identify and support external jog control, making it convenient to clamp the sample;

(14) It has the function of automatic shutdown for overload protection, and can automatically determine whether the sample is broken and automatically shut down.

According to different user requirements, the above software functions may be increased or decreased or adjusted.

5. Software and software operation interface:

(1)The software can be in Windows98/2000/XP, and the user interface presents a Chinese/English window system consistent with the Windows style.

(2) Multiple control modes can be selected for automatic program control.

(3) Automatic program-controlled intelligent expert system. Up to 50 steps can be automatically programmed.

(4)Report editing

(5) There are many kinds of test methods, optional

(6)The software has three levels of management authority, which are logged in with their respective passwords, which further ensures the safe use of the software.

Standard

It meets the requirements of the national standard GB/T228.1-2010 "Metal Material Tensile Test Method at Room Temperature", GB/T7314-2005 "Metal Compression Test Method", and complies with the data processing of GB, ISO, ASTM, DIN and other standards. It can meet the requirements of users and the standards provided.              

Keywords: Static Universal Testing Machine

这里是标题一h1占位文字

APPLICATION AREAS

Railway transportation industry

Railway transportation industry

Petrochemical Industry

Petrochemical Industry

Automobile and motorcycle industry

Automobile and motorcycle industry

Wood-based panel industry

Wood-based panel industry

Construction and building materials industry

Construction and building materials industry

Iron and steel metallurgical industry

Iron and steel metallurgical industry

Steel structure fastener industry

Steel structure fastener industry

Spring industry

Spring industry

FAQ

Q : What are the certifications for your products?

Q : What are the certifications for your products?

A : We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.
A : We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.
Q : What is your terms of payment ?

Q : What is your terms of payment ?

A : ayment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
A : ayment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
Q:What about product prices information?

Q:What about product prices information?

A : Prices various according to periodic price changes of raw materials.
A : Prices various according to periodic price changes of raw materials.
Q:What ports of shipment are there?

Q:What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Jinan Kaide Instrument Co., Ltd.

Apply For Discount !

24 Hours Online Service

Provide You With Free Industry Solutions

Quality Assurance

%{tishi_zhanwei}%