+
  • 101.png
  • 102.png
  • 103.png

JU-22A 22J Cantilever Impact Testing Machine

Impact velocity:3.5m/s
Impact blade angle:75°
Pendulum tilt angle:150°
Strike center distance:335mm
Supporting blade radius:R=0.8±0.2mm
Distance from blade to jaw:22±0.2mm

Application

This testing machine is mainly used for the determination of the impact toughness of non-metallic materials such as hard plastics (including plates, pipes, and plastic profiles), reinforced nylon, glass fiber reinforced plastic, ceramics, cast stone, and electrical insulating materials. It is widely used in the chemical industry, scientific research units, quality inspection departments of universities and colleges.

This instrument is an impact testing machine with simple structure, convenient operation, accurate and reliable data. Please read this manual carefully before use.

Key Features

(1)Never exceed bad quality

(2)The instrument uses high-hardness and high-precision bearings

(3)Adopts a shaftless photoelectric sensor, which fundamentally eliminates the loss caused by friction and ensures that the frictional energy loss is far less than the standard requirement.

(4)According to the impact situation, intelligently prompts the work status and interacts with the experimenter from time to time to ensure the success rate of the experiment

Specification

 

Specification

JU-22A

Impact velocity

3.5 m/s

Pendulum energy

1J,2.75J,5.5J

Pendulum torque

Pd1==0.53590Nm

Pd2.75=1.47372Nm

Pd5.5=2.94744Nm

Strike center distance

335mm

Pendulum tilt angle

150°

Supporting blade radius

R=0.8±0.2mm

Distance from blade to jaw

22±0.2mm

Impact blade angle

75°

 

Standard

ISO180, GB/T1843, GB/T2611, JB/T 8761 

Keywords: Static Universal Testing Machine

这里是标题一h1占位文字

APPLICATION AREAS

Railway transportation industry

Railway transportation industry

Petrochemical Industry

Petrochemical Industry

Automobile and motorcycle industry

Automobile and motorcycle industry

Wood-based panel industry

Wood-based panel industry

Construction and building materials industry

Construction and building materials industry

Iron and steel metallurgical industry

Iron and steel metallurgical industry

Steel structure fastener industry

Steel structure fastener industry

Spring industry

Spring industry

FAQ

Q : What are the certifications for your products?

Q : What are the certifications for your products?

A : We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.
A : We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.
Q : What is your terms of payment ?

Q : What is your terms of payment ?

A : ayment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
A : ayment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
Q:What about product prices information?

Q:What about product prices information?

A : Prices various according to periodic price changes of raw materials.
A : Prices various according to periodic price changes of raw materials.
Q:What ports of shipment are there?

Q:What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Jinan Kaide Instrument Co., Ltd.

Apply For Discount !

24 Hours Online Service

Provide You With Free Industry Solutions

Quality Assurance

%{tishi_zhanwei}%